Make Your Own HIGH VOLTAGE ELECTROMAGNETS PDF Download
When winding your magnets make sure you do not crimp the wire or
pull to hard on the wire, if your using a automatic wire wrapper make
sure there is little resistance in the wire while wrapping so as not to
stretch the wire and crack the outer lacqour coated surface if any of
these things happen you will have a high voltage burn out, it will short
out your wire! and not in just one place but in a dozen places,
Remember high voltage can travel in the strangest places.
Warning we are not responsible for anything in these plans you
build at your own risk. remember be careful high voltage can kill
you even more after it has gone into a capacitor.
The Iron core is a special iron core type that we use, others may work
but we found this to be the best, It’s more expensive but worth it it’s
called: DUCTAL 65-4512 YOU CAN BUY IT AT:
INDUSTRIAL TUBE & STEEL CINCINATI OHIO. 1-800-332-9567
ELECTROMAGNET TYPE A AND B COME IN BARS, AND TYPE C WE USE
ROUND ROD. IT IS CHEAPER IF YOU CAN BUY A 6′ PIECE FOR ABOUT $54
IF YOU BUY JUST A SMALL PIECE IT WILL COST YOU THE SAME FOR THEM
TO CUT UP AND SHIP TO YOU. IT IS MADE UP OF: 3.6 TO 3.9 carbon,
2.3 to 2.8 silicon, .01 to .04 magnese.