Hydro Generator Micro Hydro Water Turbine Generator US Plug for Household Lighting TV Electric Furnace 110V (500W)

Description

Hydro Generator Micro Hydro Water Turbine Generator US Plug for Household Lighting TV Electric Furnace 110V (500W)

Micro Hydro Water Turbine Generator

Color: 500W

Specifications:

Power: 500W

Flow: 0.007m3/s

Head: 6-15m

Speed: 500-1500r/min

INS.CL: E

Current: 2.3A

Phase: 1 phase

Feature:

1. With the best NdFeB Permanent Magnet, high-grade pure copper winding

2. Specially-designed rotor and rotator, low resistance moment in start-up, good at cooling

3. Gearless, direct -drive, and low rare earth Permanent Magnet Generator

4. Die casting Aluminum alloy case, anti- corrosion

Application:

Can be used in remote areas for temporary power

Connected this unit to collapsible hose (fire hose) for temporary power while camping

Suitable for household lighting, TV, electric furnace and other pure resistance household appliances

NOT suitable for household appliances such as refrigerators, washing machines, pumps, etc

Installation Procedure:

After the unit foundation be poured with concrete is solidified, the unit is installed in place and then watered in sequence

The water level must be measured with a level gauge to ensure that the unit is fixed in a horizontal position.

The gap between the unit and the floor should be sealed with cement, and no water seepage is allowed

After the unit is installed, check again and turn the turbine shaft of the turbine by hand. If the machine is flexible, the installation is finished

Installation requirements: The bottom plane of the turbine in close contact with the foundation plane

NOTE:

500w hydro generator only can be used with the following conditions:

1) The vertical Water level difference between the unit foundation and the hydro generator must be in this range:7-15M

2) The water flow must can fully fill the water tube that is above 7.5cm diameter all the time