ECOTOUCH Tankless Water Heater Electric
Electric Tankless Water Heater For Sinks
Being one of those limited choices with smart modulation heating, ECOTOUCH tankless water heater provides instant & endless hot water with optimal thermal efficiency of 98% and minimum energy cost. Thus, the tankless water heater heats up 1.2GPM water from 67℉ to 109℉, which out runs most point use water heaters and will sure cut your electric bill.
ECO55B gets remote controlled. if remote control works well, indicator lamp will be light up in the upper left corner. You can quickly set temperature to104°F, allows for easy temperature adjustment, used in places that can’t touch or not convenient operate.
Designed with compact size, it is one of perfect solutions for Kitchen & Bathroom Sinks, Wet Bars, Strip Malls, Doctor’s Office.
MULTIPLE SAFETY PROTECTIONS
Over temperature protection
Dry heating protection
Water and electricity line separated
1.The unit is mainly for sinks, not for shower purpose.
2.The tankless water heater should be installed professionally.
3.Please read instruction manual carefully prior to installation and use!
Real compact design, water heater cooridates with scenes decor, above sink or under sink water heater, horizontally, vertically or obliquely installation. Comes with easy installation brackets, pipe fitting of 1/2″ NPT and 10AWG power cord(fixed to the unit) so you don’t to have to hire a plumber even if you can do it.
- Power: 5.5kW
- Voltage: 240V~60Hz
- Min. water flow to activate the unit: 0.475GMP
- Max tempt rise from 67°F to 109°F @ 1.2GPM
- Max. Amperage: 23A
- Recommended wire size: 10AWG
- Required circuit breaker : 1x 2-Pole 30 AMP
Point-of-Use Under-sink Electric Tankless Water Heaters
Instant hot water and endless
As soon as you turn it on, hot water comes out immediately with desired temperature and sufficient flow rate of 1-1.5 gallon per minute, no waiting for preheat or standby energy loss. The best part is you get endless hot water now, 24h service, anytime you need. Perfect for sinks.
No storage in bulky water tank for long time heating, avoids bacterial growth and rusting issue that do great harm to water quality. Besides, water pipe and electricity heating are designed to run independently so as to avoid scale build up, now you get steady stream of clean and fresh hot water.
Smart modulation and energy saving
Equipped with a smart modulating control for stable temp, the hot water heater adjusts exact power input according to power calculation based on flow rate and temp setting in real time, which means you get still stable temp, instead of scalding hot, when you reduce flow rate. Optimal energy efficiency is promised.
Sleek & compact design
360 degree installation, lightweight design and compact as an oatmeal box, the tankless hot water heater is capable of and being located near by. It features a sleek and attractive design to blend seamlessly with decor.
3 Smart Steps for Choosing Tankless Water Heaters
It is important to figure out your average inlet water temperature, this determines if you can get hot water of desired temp from the hot water heater. Outlet water temp equals inlet water temp plus temp raise(by the hot water heater).
Check the chart to figure out the flow rate suggested for your area and the corresponding outlet water temp to see if it meets your need. For example, if inlet water in your area is 67℉, you are able to get 1.2GPM hot water @ 109℉, if you set temp lower, you are able to get more than 1.2GPM, correspondingly.
Determining specs and electrical infrastructure is important because without the correct infrastructure your unit may not fit onto your breaker panel. We would like to remind you of reading the user manual prior installation and using for the first time.