WIND MILLS for the 21st century PDF Download
Wind blade Construction
There are many options to building a powerful windmill and generator we will show you just a few.
Some of the designs we have made have copyright and Patent Pending, such as our New Sp500
Low Rpm Generator design ( not included in these plans… Cost is $70 order # Sp500 ) This is a new type of
generator which has never been seen before, it was designed and developed by David Waggoner of
Creative Science & Research. It is truly a New Discovery for the 21st century! Very High Efficient!
The Sp500 generator is a very powerful and high efficient low rpm generator that we have
developed and which you will not see anywhere else. If you are a manufacture and
you are interested in our new invention please e-mail us and let us
know. WARNING! You can not copy, sell or manufacture any of
our devices, plans or videos without our permission!
We are not responsible for
anything in these plans, You build
at your own risk.
You may want to find a cheap
machine shop to build or weld
some of the parts for you it is not
that expensive to do in our area.
You may also have a laser cutting
company in your area. If not any
machine shop can help you.
Some of the steel parts can be
made from wood instead of metal.
But for a long lasting and a more
reliable windmill it is best to use
steel. Please be careful!
Tools you may need!
1. Small drill press or hand drill
2. Heating torch
3. Table saw or hand saw
4. Jig saw
5. A small welder
6. Polyester resin ( premixed with
7. Magnets ( ferrite blocks or
neodymium n40 blocks 1” x 2”
8. Flexible wire ( about 14 AWG size )
9. 1” bearing blocks qty 2
10. 1” x 24” round rod for rotor shaft.
11. 2 part epoxy
12. Duct tape
13. Masking tape
14. Diodes 30 amp type
15. Soldering gun
16. Band saw / for metal cuts