Description
Nature’s Generator Wind Turbine Includes 100 Foot 12 AWG Cable, 5 Blades, Controller Box for Nature’s Generator, Land or Marine Use Day and Night Patio
Nature’s Generator Wind Turbine Includes 100 Foot 12 AWG Cable
Get to Know Your Nature’s Generator
What You Can Get
1×Nature’s Generator Power Pod;
1×Accessory Box;
1×35 inches expansion cable( in the top cover of the Nature’s Generator Power Pod);
1×User Guide.
We have provided accessory box to install your Nature’s Generator Power Pod on top of Nature’s Generator.
Dimensions and Weight
Dimensions and Weight:
18 x 12 x 15 inches;92Ib.
Smart Key: Install “Nature’s Pulse” app and plug smart key to the top USB port with Bluetooth icon on its right side. You can use the APP to monitor your Generator and store daily electricity data.
Front Panel
LCD Display:
LCD display shows the information of the system.
LCD Display Button: Press it to light up LCD display for 30 seconds.
Get to Know Your Nature’s Wind Turbine Generator Power Pod
Dimensions and Weight
Dimensions and Weight:
18 x 12 x 15 inches;92Ib.
We have provided accessory box to install your Nature’s Generator Power Pod on top of Nature’s Generator.
How to Connect to Nature’s Generator
There is an expansion cable in the top cover of the Nature’s Generator Power Pod. Connect the expansion cable to the expansion port which on the back of the Narture’s Generator.
LED Light
LED Light Button:
Press it to show the battery charge level.
LED Lights:
The first light will show green, which indicates 20% charge. The second light will show green, which indicates 40% charge, the third light will show green which indicates 60% charge and the fourth light will show green which indicates 80% charge
and finally the fifth light will show green which indicates a 100% charge.
How to Connect Your Nature’s Generator Power Pod to Nature’s Generator
1. Open the top cover of the Nature’s Generator Power Pod, locate the expansion cable, and run the expansion cable out of Nature’s Generator Power Pod through the opening on the back of the Nature’s Generator Power Pod.
2. Locate expansion port on the back of your Nature’s Generator and open the rubber cover.
3. Connect the expansion cable to the expansion port. Due to the amount of voltage running between the Nature’s Generator and Nature’s Generator Power Pod, this is a very tight fit to ensure no electrical shock while connecting.
4. The Expansion (chain link) Icon will be illuminated on the display of Nature’s Generator to indicate Nature’s Generator Power Pod is connected.
Get to Know Your Nature’s Generator Solar Panel
Dimension and Weight
42 x 29 x 3 inches;36Ib.
Using lightweight anodized aluminum frame with cable management system and wheels for easy transport.
High in Performance
Polycrystalline Solar Panel Provides up to 100W of Recharging Power. We use 50 foot UL approved 12 AWG pure copper cable to improve conversion.
Tips in Using
1.You can use the four eyebolts to
anchor the solar panel to the ground.
2.You can turn star knob clockwise
to stop the wheel or counter clockwise to release.
High in Performance
Solar panel have three angles that can be adjusted to take full advantage of sunlight.
Get to Know Your Nature’s Generator Wind Turbine
What You Can Get
1× Nature’s Generator Wind Turbine Main Body;1×Hub;1×Nose cone;5×Blades;1×100ft Cable;1×Controller box;1×User Manual;1×Accessory bag(You need install the wind turbine by yourself)
Made Materials
Wind turbine blades are made of fiberglass nylon composite; Wind turbine body is made of cast aluminum alloy with powder coating; Wind turbine cable is made of 12AWG pure copper cable.
Complete Electrical System Wind Turbine
The Nature’s Generator Wind Turbine comes with 100 ft cable and controller box. It is a complete electrical system to recharge your Nature’s Generator.
Power Ratting
27 mph or 12 m/s wind speed rated mechanical power;150W rated electrical power;110 mph maximum wind speed.
Get to Know Your Nature’s Generator Power Transfer Kit
What You Can Get
1×Power Transfer Switch;
1×Conduit;
1×Power Cord;
3×Cable Clamps;
1×Installation Manual;
1×User Manual;
Pay Attention
The Power Transfer Kit only works on 110V. It is not compatible with 220V.
To maximize the efficiency of your generator, divide appliance circuits and others requiring higher wattage between adjacent circuit selector switches of the transfer switch so that a usage balance is achieved between the opposing legs of the generator power.
Where to Install Wind Turbine
The size of Power Transfer Switch is 13 1/4 x 8 x 4 3/4 inches. The conduit is approximately 18 inch with the clamps. It is recommended to install it in a close area to your breaker panel.
Reviews
There are no reviews yet.