Description
XINPUGUANG 2pcs 100w Monocrystalline Solar Panel Flexible 200W 12V Solar System kit Photovoltaic Module Cell 20A Controller PV Connector for Home, RV, Caravan, Boat and Other Battery Charger200W)
XINPUGUANG 2pcs 100w Monocrystalline Solar Panel Flexible 200W 12V
Solar Panel Specification
Maximum power(Pmax) 100W
Maximum system voltage 700V DC
Open circuit voltage(Voc) 21.6V
Short circuit current(Isc) 6.66A
Maximum power voltage(Vmp) 18V
Maximum power current(Imp) 5.55A
Cell efficiency 19.8%
Weight 4.4lbs（2.0KG）
Size 46.25×21.25×0.11（1175**540*3 mm）
Standard Test Conditions ： lrradiance 1000w/m2，Temperature 25℃,AM=1.
XINPUGUANG flexible solar panel make with high-efficiency Monocrystalline cell ，19.8% convert efficiency， can be bent 30-40 degree, can be installed on the curved surface. just 80% lighter than the glass solar panel, 3mm thickness，easy to carry, easy to ship, easy to install. Applied to Golf car, Yacht, Boat, RV，Caravan, Electric car, Travel tourism car, Patrol car, roof, camping, roof power generations, tent, marine ，etc.
Solar system kit wiring method and precautions
1.The solar system kit connection is divided into parallel connection or serial connection. The controller must be first connect the battery , and then connect the solar panels.
2.When the solar panels are connected in series or in parallel, paid to the highest PV input voltage of the controller. The voltage connected in parallel to the controller after the series connection cannot exceed the maximum input voltage of the controller.
3.The total input power of the solar panel can’t be greater than the rated power of the controller, otherwise, there is a risk of burning the controller.
4.When the cable is connected to each component, the connection should be stable and there should be no looseness.
5.The positive and negative poles of the controller and battery should be checked clearly. Do not reverse the positive and negative poles.
6.When the power rating of one controller is insufficient to meet all solar panels, multiple controllers can be simultaneously connected to the battery.
20A charger controller
- Battery voltage：12V/24V auto
- Charge current:20A
- Discharge current：20A
- USB output：5V/2A
- Self-consume：<10mA
- Operating temperature：-35~+60 ℃
- suitable for ：lead acid batteries， lithium ions
- Build-in short-circuit protection, open-circuit protection, reverse
Extension cable with PV connector
- Model: 14AWG
- Number of cores: single core multiple strands
- The maximum external diameter of the wire: 5.3 ± 0.2 (mm)
- Nominal cross section: 2.5 (mm)
- Uses: Photovoltaic power generation
- Core material: tinned copper wire
- Product Certification: TUV
- Voltage rating: 0.6/1KV
- Rated voltage: 1000V
- length：3M
cable with alligator clip
- Model: 14AWG
- Number of cores: single core multiple strands
- The maximum external diameter of the wire: 5.3 ± 0.2 (mm)
- Nominal cross section: 2.5 (mm)
- Uses: Photovoltaic power generation
- Core material: tinned copper wire
- Product Certification: TUV
- Voltage rating: 0.6/1KV
- Rated voltage: 1000V
- length：3M
2 in 1 Parallel connector
- Maximum working voltage:DC1000V
- Rated Current:30A
- Flame class: UL94-V0
- Contact resistance:≤5mmΩ
- Shell Protection degree:IP67
- Specification of Connecting Line: 4mm²
- Contact Material: Copper, Tin plate
- Ambient temperature range：-40～+85℃
- Safety Level: class‖
Packing list
1. 2pcs 100w solar panel
2. 20A 12v/24v charge controller
3. 1 set Extension cable with PV connector
4. 1 set cable with alligator clip （connect to battery）
5. 1 set 2 in 1 Parallel connector（in parallel solar panel）
Matthew Leffler –
So the panels seem awesome, they really helped move my 700 watt system up to a new level. I got the 1800 and the 600 kit and they keep my 12 100ah batteries charged now.The controller screws are so small, so danty…I havent been able to use them yet. Of the literally 100 screw heads I have not one is small enough to not strip these screws.